Untitled Document
Kontakt | Prijava
IKPIR: BIBLIOGRAFIJE: COBISS-ID: 68711 Ljubljana,  

 

Avtorstvo: Boštjan BRANK // 1.01 Izvirni znanstveni članek
Leto: 1997
Citat: BRANK, Boštjan, PERIĆ, Djordje, DAMJANIĆ, Frano. On large deformations of thin elasto-plastic shells: implementation of a finite rotation model for quadrilateral shell element. Int. j. numer. methods eng., 1997, vol. 40, str. 689-726.
Povzetek: A large-deformation model for thin shells composed of elasto-plastic material is presented in this work. Formulation of the shell model, equivalent to the two-dimensional Cosserat continuum, is developed from the three-dimensional continuum by employing standard assumptions on the distribution of the displacement field in the shell body. A model for thin shells is obtained by an approximation of terms describing the shell geometry. Finite rotations of the director field are described by a rotation vector formulation. An elasto-plastic constitutive model is developed based on the von Mises yield criterion and isotropic hardening. In this work, attention is restricted to problems where strains remain small allowing for all aspects of material identification and associated computational treatment, developed for small-strain elastoplastic models, to be transferred easily to the present elasto-plastic thin-shell model. A finite element formulation is based on the four-noded isoparametric element. A particular attention is devoted to the consistent linearization of the shell kinematics and elasto-plastic material model, in order to achieve quadratic rate of asymptotic convergence typical for the Newton-Raphson-based solution procedures. [COBISS.SI-ID 68711]
Tipologija: 1.01 Izvirni znanstveni članek
COBISS ID 68711 Polni zapis iz sistema COBISS
Vpisal 2009/06/10 11:56